2010 FORD F150 OIL CAPACITY & TYPE: SIMPLE STEPS TO CHANGE IT

As a proud owner of a 2010 Ford F150 truck, it’s essential to know the right kind and amount of oil to maintain optimal engine performance. Using the wrong type or not enough oil can lead to engine damage and costly repairs.

In this guide, We’ll explore the accurate oil capacity and type for your 2010 Ford F-150 to keep your truck running smoothly.

Key Takeaways

• Ford recommends using Motorcraft 5w-20 synthetic blend oil for the 2010 Ford F150.
• Maintaining the proper oil capacity and type is crucial for optimizing engine performance.
• Using the wrong type or not enough oil can lead to engine damage and costly repairs.
• The 4.6 liter V8 engine requires 6 quarts of oil, while the 5.4 liter V8 engine requires 7 quarts.
• The 2010 Ford F150 requires synthetic oil with a viscosity of SAE 5w-20.

2010 Ford F150 Oil Capacity and Type

If you have a 2010 Ford F150, it is essential to know the recommended oil type and capacity to ensure optimal engine performance. Ford highly recommends using Motorcraft 5w-20 synthetic blend oil for the best results.

Engine Type	Oil Capacity	Oil Type
4.6 L  V8 engine	6 quarts	Motorcraft 5w-20 synthetic oil
5.4 L V8 engine	7 quarts	Motorcraft 5w-20 synthetic oil

Recommended Oil For Ford F150

Understanding 2010 Ford F150 Oil Type

Choosing the right oil for your 2010 Ford F150 is crucial for optimizing engine performance and ensuring your truck runs smoothly. The 2010 Ford F150 requires synthetic oil with a viscosity of SAE 5w-20.

Synthetic oil is an excellent choice for your engine, as it provides better protection and performance, especially in extreme temperatures.

Synthetic oils are formulated with specific additives to protect the engine, reduce friction, and improve fuel economy.

Conventional motor oils, on the other hand, are not as resistant to high temperatures and break down more quickly.

The Society of Automotive Engineers (SAE) has created a numerical system to classify motor oil based on its viscosity. Viscosity is a measure of the oil’s resistance to flow.

The lower the viscosity, the easier the oil flows. The number before the “W” indicates the oil’s viscosity at low temperatures, while the number after the “W” indicates its viscosity at high temperatures.

SAE 5w-20 oil flows smoothly in cold weather and provides adequate protection at high temperatures, making it the ideal choice for your 2010 Ford F150.

Additionally, it is essential to change the oil regularly according to the recommended intervals specified in the owner’s manual to maintain optimal engine health. The frequency of the oil change depends on various factors such as driving conditions, frequency, and load.

Ford recommends changing the oil every 7500 miles or six months, whichever comes first.

In summary, Motor oil is the lifeblood of your engine, and using the recommended viscosity and synthetic oil is vital for engine protection, better fuel economy, and optimal performance.

Recommended Oil For Ford F150

How to Change the Oil in a 2010 Ford F150

Regularly changing the oil in your 2010 Ford F150 is essential for optimal engine performance. To change the oil you’ll need:

• Step 1: Ensure your vehicle is on a level surface and turn off the engine.
• Step 2: Locate the oil filter and drain plug under the engine.
• Step 3: Place the drain pan under the drain plug to collect the oil.
• Step 4: Remove the drain plug and let the oil drain completely into the pan.
• Step 5: Once the oil has drained, replace the drain plug.
• Step 6: Remove the oil filter and let the remaining oil drain into the drain pan.
• Step 7: Lubricate the new oil filter gasket with a small amount of new engine oil.
• Step 8: Install the new oil filter by turning it clockwise until it’s tight.
• Step 9: Refill the engine with the recommended amount of oil.
• Step 10: Start the engine and let it run idle for a few minutes.
• Step 11: Turn off the engine and check the oil level with the dipstick.
• Step 12: Wipe the dipstick clean, reinsert it, and remove it again to ensure that the oil level is correct.

FINAL THOUGTHS

Properly maintaining the oil in your 2010 Ford F150 is crucial for keeping your engine running smoothly. Make sure to use the recommended full synthetic oil with a viscosity of SAE 5w-20, which provides better protection and performance in extreme temperatures.

Coolant ensures that your engine runs at an optimal temperature, while brake fluid is essential for safe braking. Keep these fluids at the recommended levels to ensure your truck is always running smoothly and safely.

Remember to change the oil at the recommended intervals with the proper oil capacity and type to optimize engine performance. And don’t forget to check the coolant and brake fluid levels to ensure safe and reliable driving.

FAQ

What is the recommended oil capacity for a 2010 Ford F150?

The 2010 Ford F150 with a 4.6l V8 engine requires 6 quarts of oil, while the 5.4l V8 engine requires 7 quarts.

What type of oil should I use in my 2010 Ford F150?

Ford recommends using Motorcraft 5w-20 synthetic oil for the 2010 Ford F150.

Why is synthetic oil recommended for the 2010 Ford F150?

Synthetic oil provides better protection and performance, especially in extreme temperatures. It is essential for maintaining optimal engine health.

How do I change the oil in my 2010 Ford F150?

To change the oil in a 2010 Ford F150, first, locate the oil pan and place a drain pan underneath. Remove the oil drain plug to drain the old oil completely. Replace the oil filter with a new one and pour the recommended amount of Motorcraft oil into the engine. Finally, check the oil level using the dipstick to ensure it is at the proper level.

What other maintenance should I perform on my 2010 Ford F150?

In addition to regular oil changes, it is recommended to check coolant and brake fluid levels regularly for overall vehicle safety and performance.